10435A HP Miniature Passive Oscilloscope Probe

Review HP Miniature Passive Oscilloscope Probe 1m

The HP 10435A Miniature Passive Oscilloscope Probe is a compact and versatile tool designed for accurate measurement and analysis of electrical signals in various applications. This probe is particularly suitable for use with miniature oscilloscopes or benchtop oscilloscopes that have a 1x or 10x probe input.

The probe features a 10:1 passive probe design, which provides a voltage division factor of 10. This means that it can measure voltage ranges from 0.1V to 10V with high accuracy and resolution. The 1m tip length makes it ideal for probing hard-to-reach or compact circuits, making it an essential accessory for electronic engineers, technicians, and hobbyists.

The HP 10435A probe is designed with a high-quality, shielded, and insulated tip that ensures accurate measurement and minimizes the risk of picking up unwanted noise or interference. The probe's tip also has a small diameter, which allows for easy access to small components and pads.

Additionally, this probe features a detachable BNC connector, making it easy to connect and disconnect from the oscilloscope. The probe also comes with a protective cap to keep the tip clean and prevent damage when not in use.

The HP 10435A Miniature Passive Oscilloscope Probe is built to meet the highest standards of accuracy and reliability. It is calibrated to ensure traceability to national standards and comes with a calibration certificate. The probe is also ruggedly constructed to withstand the rigors of laboratory or field use.

In summary, the HP 10435A Miniature Passive Oscilloscope Probe is a high-performance, compact, and versatile tool that is essential for accurate measurement and analysis of electrical signals in various applications. Its 10:1 passive probe design, 1m tip length, and small diameter tip make it ideal for use with miniature oscilloscopes or benchtop oscilloscopes with a 1x or 10x probe input. The probe's high-quality construction, shielded and insulated tip, and rugged design make it a reliable and accurate measurement tool for electronic engineers, technicians, and hobbyists.

The HP 10435A Miniature Passive Oscilloscope Probe is a popular choice for those in need of a high-performance, compact oscilloscope probe. Here are some pros and cons to consider before making a purchase:

1. High bandwidth: The probe offers a bandwidth of up to 1 GHz, making it suitable for analyzing high-frequency signals.

2. Small form factor: The miniature probe design makes it easy to use in tight spaces and portable for field use.

3. Wide dynamic range: The probe has a wide dynamic range of 120 dB, which helps to minimize signal distortion and ensure accurate measurements.

4. Interchangeable tips: The probe comes with interchangeable BNC and SMA tips, providing flexibility for different test setups.

5. Calibrated: The probe is factory calibrated and comes with a calibration certificate, ensuring accurate and reliable measurements.

1. Expensive: The HP 10435A probe is more expensive than some other probes on the market.

2. Requires an oscilloscope: The probe is only useful when connected to an oscilloscope, so the cost of the oscilloscope must also be considered.

3. Limited input impedance: The probe has a limited input impedance of 1 M , which may not be suitable for all applications.

4. Sensitive to handling: The miniature design makes the probe more sensitive to handling, so care must be taken to avoid damaging the probe or the signal.

The HP 10435A Miniature Passive Oscilloscope Probe is a high-performance, compact probe suitable for analyzing high-frequency signals in tight spaces. Its wide dynamic range, interchangeable tips, and factory calibration make it a reliable and accurate choice for professionals. However, its high cost and limited input impedance are important considerations. Ultimately, the decision to purchase this probe will depend on the specific requirements of your application and your budget.

If you require a high-performance, compact oscilloscope probe for analyzing high-frequency signals, the HP 10435A Miniature Passive Oscilloscope Probe is a strong contender. However, if cost is a concern, you may want to consider other probes with similar specifications that are more affordable. Additionally, if your application requires a higher input impedance, you may want to look for a probe with a different input impedance specification.

Details:

With its compact size and passive design, this probe is ideal for measuring signals in a variety of industrial testing applications. The Hp 10435A miniature passive oscilloscope probe is a high-quality 10:1 probe designed for use with oscilloscopes. Note that though in original packaging there is yellowing from age.

specifications oscillovectscopes:

• brand: Hp
• mpn: 10435a
• part type: Oscilloscope Probe
• oscilloscope type: Miniature Passive Oscilloscope Probe

shipping oscillovectscopes:

• type: calculated
• carrier: usps, ups
• service: usps ground advantage, ups ground
• class: standard
• transit: 4-10 days

general oscillovectscopes:

• category: Business & Industrial > Test, Measurement Inspection > Analyzers Data Acquisition > Oscilloscopes Vectorscopes

payments oscillovectscopes:

• credit card: visa
• wallet: apple-pay
• other

returns oscillovectscopes:

• policy: no returns

seller oscillovectscopes:

• # reviews: 245
• city: colorado springs, colorado
• rating: 94.4%

offer oscillovectscopes:

• options: ship-to-home
• prices: $31.49–$99.99
• item condition:
  • Used
  • For parts or not working
  • New – Open box
• started: july 19, 2025
• sold #: 15
• in stock #: 5
• availability: in stock